GlowShift’s Tinted 7 Color Series 30 PSI Fuel Pressure Gauge is the perfect gauge for any diesel truck that is running with lower fuel pressure. This gauge ensures your fuel pressure is running at peak levels, ensuring the pressure is not too low which could result in damage to your fuel pump or injectors and loss of overall horsepower. This 30 PSI fuel pressure gauge has been updated to include a 1/8-27 NPT electronic 30 PSI fuel pressure sensor allowing it to be installed directly to your fuel system. This new sensor is twice as small as the previous model and offers extremely accurate readings directly from the source. Featuring an illuminated red needle that sweeps 270 degrees and is powered by stepper motor technology, this gauge offers smooth needle movement and extremely accurate readings. This gauge also features a low profile magnified tinted lens and 7 color through dial LED lighting letting you match your factory dash lights or add a custom look to your interior. GlowShift’s 7 color through dial LED lighting system allows the user to easily cycle through 7 solid color modes, 2 color cycle modes, and for easier night driving the LEDs can be dimmed 30% when connected to your factory headlight switch. The included color memory recall feature guarantees you don’t need to worry about adjusting the color of your gauge every time you turn your vehicle. GlowShift stands behind all of its products by including free lifetime technical support and a one year limited warranty with every gauge purchase.
Note: This gauge includes a 1/8-27 NPT thread size on the sensor and your vehicle may not come equipped with the same thread size. An additional threading adapter may be required for the installation of the sensor. If you are unsure if your application will require additional threading adapters, please contact a GlowShift Technical Support Specialist.
If the 9' pressure sensor harness that comes included with the gauge is not long enough for your specific application, GlowShift offers an Extended Length Pressure Gauge Sensor Harness that features lengths of 18' for trucks with aftermarket lift pumps located at the rear of the truck and 40' for larger vehicles such as RVs. This sensor harness effortlessly snaps into the 1/8-27 NPT sensor and to the back of the fuel pressure gauge.
Dodge Cummins Note: A Snubber Valve is required when installing a 30 PSI Fuel Pressure Gauge into a 1986-2012 Dodge Ram Cummins. The Snubber Valve regulates, normalizes and eliminates fuel pressure spikes that are present during the initial ignition and startup on the Dodge Cummins Diesel Engine through the use of a regulator. High pressure fuel system spikes during startup are harmful and may cause early and unexpected failure of electronic fuel pressure sensors and/or sending units for fuel pressure gauges.
GM Duramax Note: If you are installing this gauge to a GM Duramax engine, an aftermarket lift pump is required for this gauge to function properly.
- 2-1/16" (52mm) Black Face Gauge with a Magnified Tinted Lens
- Fuel Pressure Reading from 0 to 30 PSI
- 7 Color LED Through Dial Lighting with Color Recall Ability
- 7 Solid Color Settings and Two Color Cycle Modes
- Electronic Fuel Pressure Sensor with 1/8-27 NPT Male Threads
- 9' Sensor Harness
- Stepper Motor Technology
- Dimmer Wire Allows the Gauge to Dim 30%
- Gauge Depth Measures 1-5/16"
- Gauge Visor
- Mounting Hardware
- Installation Instructions
- Free Lifetime Technical Support
- One Year Limited Warranty